Cara Mengkonfigurasi Internet Connection Sharing Dalam Windows XP

Using Internet Connection Sharing to share an Internet connection, the host computer must have a network adapter that is configured to connect to the internal network and one network adapter or modem configured to connect to the Internet.
On the host computerOn the host computer, follow these steps to share the Internet connection:

   1. Log on to the host computer as Administrator or as Owner.
   2. Click Start, and then click Control Panel.
   3. Click Network and Internet Connections.
   4. Click Network Connections.
   5. Right-click the connection you use to connect to the Internet. For example, if you are connected to the Internet using a modem, right-click the connection you want in bawahDial-ups.
   6. Click Properties.
   7. Click the Advanced tab.
   8. Under Internet Connection Sharing, select the Allow other network users to connect through this computer's Internet connection.
   9. If you share a dial-up Internet connection, select the check box dial-up connection whenever a computer on my network attempts to access the Internet if you want a computer connected to the Internet automatically.
  10. Click OK. You receive the following message:
      When Internet Connection Sharing is enabled, your LAN adapter will be set to use IP
      address 192.168.0.1. Your computer may lose connectivity with other computers on
      in the network. If these other computers have a fixed IP address, should be set
      to obtain their IP addresses automatically. Are you sure you want to enable Internet
      Connection Sharing?
  11. Click Yes.
The connection to the Internet is shared to other computers on local area networks (LANs). Network adapters connected to the LAN is configured with the IP address of 192.168.0.1 and a subnet mask of 255.255.255.0
To view a video about how to configure the host computer for Internet Connection Sharing, click the Play button (Collapse imageExpand this imagePlay button) On the Windows Media Player viewer below:
http://support.microsoft.com/servicedesks/ShowMeHow/3061261.asx



Note To see the video, you must use Windows Media Player 7.0 or newer.
For additional information about how to obtain Windows Media Player version 7.1, click the following article number to view the article in the Microsoft Knowledge Base:299321 (http://support.microsoft.com/kb/299321/) Description and availability of Windows Media Player 7.1 (This article may contain links to content in English (not translated)).On the client computerTo connect to the Internet by using a shared connection, you must confirm the LAN adapter IP configuration, then configure the client computer. To confirm the LAN adapter IP configuration, follow these steps:

   1. Log on to the client computer as Administrator or as Owner.
   2. Click Start, and then click Control Panel.
   3. Click Network and Internet Connections.
   4. Click Network Connections.
   5. Right-click Local Area Connection, then click Properties.
   6. Click the General tab, click Internet Protocol (TCP / IP) in the Connection list uses the following items, then click Properties.
   7. In the Properties dialog box Internet Protocol (TCP / IP), click Obtain an IP address automatically (if not already selected), then click OK.

      Note You can also assign a specific fixed IP address within the range of 192.168.0.2 to 192.168.0.254. For example, you can assign a fixed IP address, subnet mask, and default gateway the following:

         IP address 192.168.0.2
         Closing Subnet 255.255.255.0
         Default gateway 192.168.0.1
     

   8. Inside the Local Area Connection Properties dialog, click OK.
   9. Close the Control Panel.
To view a video about how to confirm the LAN adapter IP configuration, click the Play button (Collapse imageExpand this imagePlay button) On the Windows Media Player viewer below:
http://support.microsoft.com/servicedesks/ShowMeHow/3061262.asx



Note To see the video, you must use Windows Media Player 7.0 or newer.
For additional information about how to obtain Windows Media Player version 7.1, click the following article number to view the article in the Microsoft Knowledge Base:299321 (http://support.microsoft.com/kb/299321/) Description and availability of Windows Media Player 7.1 (This article may contain links to content in English (not translated)).To configure client computers to use the shared Internet connection, follow these steps:

   1. Click Start, and then click Control Panel.
   2. Click Network and Internet Connections.
   3. Click on Internet Options.
   4. In the Internet Properties dialog box, click the Connections tab.
   5. Click the Setup.

      New Connection Wizard starts.
   6. On the Welcome page in the New Connection Wizard, click Next.
   7. Click Connect to the Internet, and then click Next.
   8. Click Set up the connection manually, and then click Next.
   9. Click Connect using a broadband connection that is always active, and then click Next.
  10. On the New Connection Wizard Complete page, click Finish.
  11. Close the Control Panel.
Now when you run Microsoft Internet Explorer, the client computer will attempt to connect to the Internet by using the host computer's shared Internet connection.
To view a video about how to configure client computers to use the shared Internet connection, click the Play button (Collapse imageExpand this imagePlay button) On the Windows Media Player viewer below:
http://support.microsoft.com/servicedesks/ShowMeHow/3061263.asx



Note To see the video, you must use Windows Media Player 7.0 or newer.
For additional information about how to obtain Windows Media Player version 7.1, click the following article number to view the article in the Microsoft Knowledge Base:299321 (http://support.microsoft.com/kb/299321/) Description and availability of Windows Media Player 7.1 (This article may contain links to content in English (not translated)).Back to topTroubleshootingWhen you turn on Sharing on the host computer, the host computer's LAN adapter IP address of 192.168.0.1 will be set automatically. Therefore, one of the following situations may occur:

    * IP address conflict
      Each computer on the LAN must have a specific IP address. If more than one computer has the same IP address, IP conflicts, and one network adapter will die until the conflict is resolved. To resolve this conflict, configure the client computer to automatically display the IP address, or assign a specific IP address.
    * Loss of network connection
      If your network is configured with a different IP address range used by Internet Connection Sharing, you will lose network connectivity with the host computer. To overcome this problem, configure the client computer to assign IP addresses automatically, or assign each client computer with a specific IP address in the range 192.168.0.2 to 192.168.0.254.